Super Snow Bucket Skid Steer Attach with Hydraulic Wings Pusher Box or Plow

Description

The Super Snow Bucket by FELIX EQUIPMENT
Take it from the guys in Sweden and Norway, if you want to move snow, this is the swiss army knife of snow removal
VIDEO ON YOUTUBE HERE UNLESS EBAY BLOCKS IT
The bucket uses a standard Skid Steer Quick Attach
Bucket Width is 7.5 Feet
Each wing is 30 Inches
So with wings straight out you can clear 12.5 feet
It's 41 inches tall and 41 inches deep
Bucket has all 3 cutting edges reversable for snow pack or ice breaking.
When using the bucket , the bucket will be in a slight angle postion rather than flat to the ground so the wing cutting edges
need to flex as the angle changes, this is accomplished by way of a spring mechanism on the rear of the wing.
Also if the wing strikes an object there are Hydraulic Accumulators (see Pics) which dampen the impact on the hydraulic system
and bucket infastructure.
The bucket is available with 2 separate hydraulic circuits for each wing (standard flat face hydro connectors)
An optional Case Drain setup is also available to send hydro oil back to tank based on relief valve setting
for further protection (your skid steer/tractor/wheel loader would need the case drain outlet)
The Case Drain outlet is the funny looking smaller 3rd male connector where you  plug in
Additional parts would need to be purchased to operate electrically