Crutchfield Amp Wiring Kit 1/0 gauge

Description

Product highlights
amplifier wiring kit
RCA cables and speaker wire not included
maximum power ratings: Class AB: 2100 watts RMS, Class D: 3300 watts RMS
oxygen-free copper wires meet all ANSI and CEA standards
17 feet (5.2m) of 1/0-gauge red power wire with ring terminal
3 feet (0.9m) of 1/0-gauge black ground wire with ring terminal
17 feet (5.2m) of 18-gauge blue remote turn-on lead wire
brass mini-ANL fuse holder and two 150A fuses (300A total rating)
assorted hardware
6 feet (1.8m) of 1/0-gauge black split loom
1/0-gauge firewall bushing
two 22-18-gauge butt connectors
six wire ties
warranty: 1 year
What's in the box
17' Length of 1/0AWG power wire (red translucent jacket and terminated with ring-terminal on one end)
3' Length of 1/0AWG ground wire (black translucent jacket and terminated by a ring-terminal on one end)
17' Length of 18AWG remote turn-on wire (blue jack)
Fuse holder
Two 150A Mini-ANL fuses (installed in fuse holder)
Firewall bushing
2 Butt-connectors
6' Length of split loom
6 Wire ties
About this item
Written by Crutchfield's Buck Pomerantz
Deliver the power your amp deserves
Crutchfield's 1/0-gauge amplifier wiring kit contains the wire and hardware necessary to supply power to your amplifier safely, efficiently, and economically. This wiring kit does not include RCA patch cables or speaker wire. You may need to purchase those items separately, in order to complete your installation. Please note that the 1/0- gauge power and ground wires in this kit are very thick, up to 3/8 inches in diameter. Make sure your amplifier's power and ground terminals can accept wires of this size before ordering.
Power ratings and amp efficiency
Most amplifiers come in two distinct "Classes" of technology with different efficiencies and power wire size requirements. Class AB amps typically feature 50% to 60% efficiency, while Class D amps are usually 75% to 80% efficient. This Crutchfield wiring kit was designed to accommodate the energy demands of a Class AB amplifier with a total output of up to about 2,100 watts RMS, or a Class D amp with up to 3,300 watts RMS output.
Crutchfield wire
Crutchfield wire is made of oxygen-free copper, with no impurities that could raise its resistance to a signal's flow or add interference. Crutchfield wire meets all Consumer Technology Association (CTA-2015) standards for size, resistance, and insulation quality.